1/2 Ground Control Gate Valve with extension. Rather than make a stub in tee to glue into the valve, this valve has a short section of pipe attached, already coped for 1/2″ tubing, thus saving you the task of making several of them. The reverse side is recessed to accept… Read More
Ground Control Gate Valve. Slips over 3/8″ tubing. Use Grandt Line 5122 Cable Sheaves for control cable or chain. Prototype is from Thomas By-Product Coke Works. Can also be used with Ground Cable Controls. 3/8″ $5.00 set/31/2″ $7.50 set/3
5/32″ Pipe Tee. These T’s are the same wall thickness as Evergreen 5/32″ tubing. Use 0.100″ rod to sleeve the tubing and Tee for a strong and straight joint. $5.00 pkg. 3
45 degree Segmented Elbow for Walthers BF Tubing. Manufactured with sockets for 1/16″ rare Earth magnets, so that joining tubing can be magnetized to the joint, rather than glued. This makes the tubing removable for cleaning or moving the models. $5.00ea.
3/16″ Pipe Cleanout Tee with cap. Use 1/8″ rod to sleeve with Evergreen 3/16″ tubing for a more rigid joint. $1.25ea.
